Engine Management System (MPI)
Mobile stand on four wheels Gasoline injector engine management system (MPI) with multipoint petrol injection installed in upper part of standStand allow to monitoring the following:
-Fuel supply systemAmount of injected fuelFuel pressure of the fuel pump.Construction of the fuel pump and fuel distribution system allow visually see the distribution of the fuel flow.
The ignition system and spark plugs installed in a way that allows visual monitoring of their activities.
Air flow in the intake manifold are adjustable, allowing functional demonstration of air mass flow and air temperature sensors.
Adjustable crankshaft rotation speed.
Ability altering the air/fuel mixture by the O2 sensor signal simulator.
Included the principal electrical circuit diagram with elements of the (MPI) system with built-in electrical measurement connectors.
Stand allows to simulate 15 system errors by disconnecting plugs from connectors.Possibility of measuring system parameters in electrical circuits, connecting to measurement contacts.
Ability to measure any system component electric parameters by connecting to the electrical circuit.Ensured the possibility of ignition system high voltage circuit measurements.
Engine management system have a built-in voltmeter.The stand has a closed structure – internal wiring is not visible.
Ensured the ability of detected systemic error reading / deletion.
Ensured the possibility of system parameters control.
Ensure the possibility of the control unit coding / configuration.
Training bench equipped with a network power supply (220 /12V) and a battery (12V).
