Automotive EPS hydraulic educational training device
Hydraulic suspension
The built-in electronic hydraulic integrated module is the pivot part of the system. According to the data information of vehicle speed, shock absorber expansion frequency and expansion degree, vertical, lateral acceleration and yaw gyro sensors are installed near the center of gravity of the car to collect the body Signals such as vibration, wheel bounce, body height, and tilt state are input to the control unit ECU. The ECU issues control commands based on the input signals and preset programs to control the servo motor and operate the four front and rear cylinders. By increasing or decreasing hydraulic oil, the height of the vehicle body is increased or decreased, that is, the ground clearance is automatically adjusted according to the vehicle speed and road conditions, thereby improving the smoothness and steering stability of the car.
Technical Parameter:
1. Dimensions: 1300 × 1000 × 1800mm (length × width × height)
2. Input power: AC 220V ± 10% 50Hz
3. Working power supply: DC12V