Test Equipment A340E Automatic Transmission training bench
Based on the electrically controlled automatic transmission of Toyota A340E, and with the speed-regulating three-phase motor as the power source, the training platform can perform the actual operation of various test conditions, such as gear display and shift, on the automatic transmission.
Truly demonstrate the structure, principle and working process of the electronically controlled automatic transmission.
It is suitable for all kinds of colleges and training institutions to teach the theory of electric control automatic transmission and maintenance practice.
The training platform has complete functions, easy to operate, safe and reliable, beautiful and generous.
1. The automatic transmission operates normally, and the diode shows the working condition of the solenoid valve.
2. The fault simulation system can simulate the actual operating conditions and set a variety of common faults in the automatic transmission of real cars.
Please refer to the description of the fault simulation setting device for details.
3. Pointer pressure gauge indicates the pressure value of main oil channel.
4..The panel of the training platform is painted with colored inkjet circuit diagram, and the inkjet diagram is equipped with plexiglass protection, so students can intuitively compare the circuit diagram and the actual engine, and understand and analyze the working principle of the control system.
5. There are detection terminals installed on the panel of the training platform, on which each sensor and actuator, such as resistance, voltage, current, frequency and waveform signal, can be directly detected.
6.Equipped with the original diagnostic seat, the automatic transmission electronic control system can be used to read fault code and data flow.
7. The training platform shall be equipped with safety protection devices such as the power main switch and the protective cover of other rotating parts.
8.The transmission can carry on each practical operation training item.
The transmission is capable of actual tests such as shifting/automatic lifting.
9. The base part of the training platform is welded with steel structure, and the panel cabinet is formed by stamping. The panel cabinet and the base can be separated.
1.External dimension: 1950mm X 1000mm X 1850mm (length X width X height)
2.Power supply: 380V AC voltage
3.Input power: 220V AC voltage
4.Working power supply: 12V DC voltage
5.Operating temperature: -50℃ ~ 50℃
6.Motor: 3.5 KW / 380